My daughter has a TinaS2 and we’re not quite ready to get into other slicers that require a computer/more complex tech skills, like wiibuilder or Cura, etc. Is there a way to change the layer height in Poloprint from her iPad?

]]>https://poloprint.net/topic/344/adjust-layer-height-in-poloprintRSS for NodeThu, 30 Apr 2026 04:12:08 GMTTue, 21 Apr 2026 23:10:43 GMT60There is also the way of changing layer height by lowering and increasing the print speed. For instance, 65 mms corresponds to 0.15 mm layer height, and 80 mms is 0.2 mm layer height. This is useful when you want to not use the preset qualities and use the custom feature.

]]>https://poloprint.net/post/958https://poloprint.net/post/958Fri, 24 Apr 2026 18:38:45 GMT@apple_user_1772082999 Hello, currently PoloPrint does not have a function to adjust the numerical value of the layer height. However, you can change the layer height by selecting different print modes within PoloPrint. After clicking "Print," you will see four options; the following are the layer heights corresponding to three of them:
High quality: 0.15mm;
Normal: 0.2mm;
Fast: 0.25mm.

]]>https://poloprint.net/post/957https://poloprint.net/post/957Thu, 23 Apr 2026 07:31:49 GMT