.2mm nozzle
-
Does anyone know where I could get other nozzle sizes (specifically .2mm) for the Tina2s? I want to do some work with minis, and a .4mm nozzle isn't small enough.
-
@DXRKRCR The nozzles are the universal MK8 type. You can find compatible 0.2 mm MK8 nozzles by searching for them on Amazon
-
@陆 Thank you so much! I will post my results for anyone else who wants info on minis.
-
@陆 I also have another question for you. I got the nozzles and did a test purge with the .2mm last night, and noticed that while purging, the feeder motor for the filament was skipping a lot. Can I use a .2mm nozzle on the Tina2s, and if I can, are there any settings that I need to change to not damage the printer?
-
@DXRKRCR Just to double check, is it safe to use the .2mm nozzle?
-
@DXRKRCR said in .2mm nozzle:
safe to use the .2mm nozzle
It is safe to use the 0.2 mm nozzle. However, because the nozzle diameter is smaller, you may notice that the filament does not extrude as smoothly as before. To improve the result, we kindly suggest lowering the printing speed or slightly increasing the printing temperature.
Please also remember to update this parameter in WiiBuilder so the settings match your new nozzle.
-
@陆 Thanks! Just wanted to check before breaking something.
